Foundation cracks FAQ

How wide of a foundation crack is too wide?

Updated

3/8" is the limit for a DIY injection kit, so anything wider is too wide. Builders rate hairline cracks up to 1/8" as negligible and 3/16" to 9/16" as moderate. Width is only half the story, though: a horizontal crack or a bowing wall needs a structural engineer at any width.

Where do those numbers come from?

The National Association of Home Builders sorts cracks by width. In its summary on common cracks, hairline cracks up to 1/8" are negligible to slight, 3/16" to 9/16" are moderate, and anything over 9/16" is severe.

The 3/8" limit is a different number. It is the widest crack the Concrete Sealers USA injection kit is rated for. Past that, the foam and surface paste are not made to bridge the gap.

How do you measure it?

Find the widest point, not the average. A credit card is about 1/32" thick and a pencil is about 1/4". If a pencil slides in with room to spare, you are close to the limit. Our crack width and direction check puts both questions together.

Then look at the shape. A thin vertical crack in a poured wall is usually a leak problem. A crack that runs sideways, steps along mortar joints, or has one side sticking out is a movement problem, and width does not change that.

Full guide: Foundation Cracks: Which Are Normal and Which Are Serious

Related questions

All foundation cracks questions