Quick answers
How does an injection kit work?
You fix small plastic ports along the crack with a two-part epoxy paste, which also seals the crack face. Once the paste sets, you push polyurethane foam into each port with a caulk gun, starting at the bottom. The foam expands, fills the crack through the wall, and stays flexible.
Concrete Sealers USA says the foam in its kit expands up to 20 times and adheres to wet or dry concrete. The full review of that kit covers what is in the box and who should skip it.

Which size do you need?
| Kit | Covers | Price |
|---|---|---|
| 10 ft kit | About 10 ft of crack up to 3/8" wide | $204.95 (checked Nov 20, 2026) |
| 10 ft kit, peel-off sealer | Same, with a sealer that peels off after | $239.95 (checked Nov 20, 2026) |
| 30 ft kit | About 30 ft of crack | $574.95 (checked Nov 20, 2026) |
Measure every crack that leaks, not just the worst one, and add them up. A crack that runs the full height of an 8-foot wall is about 8 feet long, so measure with a tape rather than guessing.
What is the hardest part of using one?
Prep. The paste needs a clean, dry crack face to hold under pressure, and most failed repairs trace back to that. Our illustrated injection steps spend as much time on cleaning as on injecting.
Is a kit right for your crack?
Check before you order. The crack check tool asks about the wall type, direction, width, offset, bowing and growth, then tells you whether to fix it, watch it, or call an engineer.